Whole Cover Exchange Table Metal Sheet and Metal Tube Fiber Laser Cutting Machine: FLC-3015HTP-12000W

1. Machine Configuration

1.1. MAXPHOTONICS Optical fiber generator

 

 

High Power Multi-Module CW Laser series adopt water cooling and modular design.

The compact design, highly-integrated system, free of maintenance, high reliability, high beam quality and high beam stability are the ideal laser source for laser cutting, laser welding, laser cladding, surface heat treatment, etc.

With the fiber laser QBH output head, the laser source can be integrated with robot or machine tool to do application in laser cutting field, new energy, construction machinery, automobile parts, aerospace, etc.

 

High Power with Great Beam Quality:

High power density with flat-head distribution;

High wall-plug efficiency.

 

Even Energy Distribution:

Less splash during cutting and welding.

 

Excellent Material Processing Performance:

High speed in thin sheet cutting;

Strong capability in thick material processing.

 

Compact Design, Maintenance Free:

Highly integrated system with modular design;

High stability and easy maintenance significantly reduce TCO.

 

Best Choice for Cutting and Welding:

Widely used in hardware processing, automobile, shipping, construction machinery, medical industries and more.

 

1.2. Special Fiber Cutting Head

 

 

BLT 6 Series smart cutters are especially developed for ultra-high power laser equipment (max of 40 kW).

Brand new beam path design and optimized optical lens bring you great performance with stable cutting, simple installation and setup, and double dust prevention.

The Smart Piercing and Auto Recut features, meeting the highly demanding standard of air as well as N₂ high-power cutting, considerably improve efficiency and yield.

 

Auto Recut:

Real-time in-head sensor realizes stable cutting performance by detecting paths not cut through to give an automatic recut.

 

Smart Piercing:

Real-time monitoring of piercing process make it possible to start cutting right after piercing. No more waiting, efficiency significantly improved.

 

Slag-free Cutting:

Monitor the laser beam to timely turn it off to realize a slag-free cutting with no gap.

 

Easy to Maintain Low Cost to Repair:

Ready-to-use optics drawer, lens changed in 5 mins. Protective screws keep cutting head from damage. No time wasting on Depot Repair.

 

Smart and Safe Processing:

Spring Energized Seal Test;

Monitor the gas pressure of the first and second lower protective lens to give early warning.

 

Protective Lens Monitor:

Upgraded algorithm integrated with sensor, effectively prevents protective lens from cracks caused by pollution.

 

1.3. Machine Lathe System

 

     

 

– Adopt the movable gantry structure and aviation casting beam.

 

Machine body is welded by the square tube. The advantage of this body is that it is stronger and welding area is less than the welded by plate. It passes holistic processing.

According to the standard of large machine, the processing procedure as follows:

 

1. Relief annealing / Vibration aging treatment;
2. Rough machining;
3. Fine machining.

 

It eliminates the stress of welding and machining greatly.

 

Besides, it can maintain high strength and high precision which can be kept for the machine more than 20 years without normal deformation.

 

– The crossbeam is casting by aluminum, which is better stability.

– Option: Automatic exchange worktable (if need). The equipment can be loaded and unloaded while processing, which is convenient and time-saving.

 

     

 

– Series of precision machining equipment (such as large gantry milling and laser interferometer) guarantee the precision level.

– The automatic oil filling system, deslagging and automatic dust removal systems ensure the safety of the machine bed and the working environment.

 

1.4. Transmission System

 

 

This machine adopts grinding YYC rack and pinion precision transmission and HIWIN/THK high-precision guide rail.

 

Besides, it adopts Japan YASKAWA/PANASONIC servo system and SHIMPO deceleration system to ensure the machine accuracy under high-speed motion.

 

1.5. Control System & Electric Parts

 

 

FSCUT8000 is EtherCAT bus system designed for ultra high power fiber laser above 8 kW, featured by out of box service, easy to install and adjust, full solution functions.

It supports customization, automation and informatization solutions, is the leading edge EtherCAT laser cutting control system on the market.

 

About electric parts, we are using the Schneider brand.

 

1.6. S&A/HANLI Water Chilling Unit

 

Large capacity industrial refrigeration unit CWFL-12000 is specifically developed to meet the demanding requirements of fiber laser up to 12000 W.

It integrates a 200 L reservoir and a reliable condenser which offers high level of energy efficiency.

The refrigerant circuit system adopts solenoid valve bypass technology to avoid frequent start and stop of the compressor to prolong its service life.

The smart temperature controller of the chiller can not only display water & room temperature but also alarm information, providing full-time protection for the chiller and the laser system as well.

Modbus-485 communication protocol is supported.

 

2. Main Spare Parts List

 

No.	Spare Parts Name	Name Brand	Origin
1	Fiber Laser	RAYCUS/MAXPHOTONICS	CN
2	Laser Cutting Head	BLT642	CN
3	Lathe Bed	CCI	CN
4	Gear & Rack	YYC	CN
5	Lead Rail	HIWIN/THK	CN
6	Pneumatic Parts	SMC	JP
7	Electric Parts	SCHNEIDER	FR
8	Reducer	SHIMPO	JP
9	CNC System	FSCUT8000	CN
10	Servo Motor & Driver	YASKAWA/PANASONIC	JP
11	Water Chilling Unit	S&A/HANLI	CN

 

3. Application

 

Fiber Laser Cutting Machine meets the parts processing requirements of most industries, working accuracy is stable.

At present, laser cutting machines have been widely used in electronics, electrical, mechanical hardware, new energy lithium, packaging, solar, LED, automotive and other industries.

 

Elevator

Auto Parts

Refrigerator

Fitness Equipment

Metal Architecture

Tubular Parts

Lampshade

Metal Furniture

 

The fiber laser cutting machine is used in sheet metal processing, aviation, aerospace, electronics, electrical appliances, subway parts, automobiles, grain machinery, textile machinery, engineering machinery, precision parts, ships.

 

 

4. Technical Parameters

 

No.	Technology Parameters Name	Technology Parameters
1	Metal Sheet Cutting Scope	3000 mm × 1500 mm/4000 mm × 2000 mm
2	Metal Tube Cutting Scope	Ø 220/350 mm × 6000 mm/12000 mm
3	Minimum Line Width	˂ 0.1 mm
4	Location Accuracy	± 0.02 mm
5	X/Y Axis Repeated Location Accuracy	0.02 mm/m
6	Maximum Speed	120 m/min
7	Maximum accelerated Velocity	1.5 G
8	Worktable Loading Weight	1200 kg
9	Machine Weight	12000 kg

 

5. Working Condition Requirement

 

No.	Item	Details
1	Electric	Power Supply: 380 V 50 Hz / 220 V 60 Hz;
		The stability of 3 phase voltage: + 5 %;
		Output voltage adjusting rate: less 2 %.
2	Assisted Air	Compressed air: Purification and dry;
		O2: High purity;
		N2: Purity no less than 99.9 %.
3	Metal Sheet	Homogeneous material;
		Neat & clean surface.
4	Compressed Air	Screw compressor (more than 12 kg) with oil water separator and dryer;
		Air storage tank Capacity: 1 m³.
5	Water	Purified water.

 

5.1. Installation Ground Requirements

 

 

 

The ground shall be flat and clean, and the foundation shall be made according to the requirements on the foundation drawing.

 

5.2. Machine installation site environmental requirements

 

1. Temperature requirements: the machine tool can be placed in an environment of – 10 ℃~ + 40 ℃. The laser must be placed in an environment of + 18 ℃ ~ 25 ℃.

If it cannot be reached, it must be in a separate room and equipped with air conditioner;

2. Humidity requirement: ≤ 70 % (laser only);
3. Requirements for dust degree: ≤ 1 mg/m³, and additional exhaust fan.

 

5.3. Environmental requirements for installation of chiller, air compressor and freeze dryer

 

1. The chiller dryer and air compressor can be placed outdoors, and the surrounding environment must be dry, dust-free, rainproof, etc. The single connecting water pipe between the chiller and the laser cannot exceed 10 m;
2. If the chiller, air compressor and freeze dryer are placed indoors, it must be ensured that there is less dust and good ventilation, and the hot air generated by the chiller must be discharged outdoors.

 

5.4. Cutting gas requirements

 

The purity of the gas used for cutting is based on the following gas purity, and the customer иcan select the gas purity according to the actual cutting effect:

Nitrogen: 99.9 % (ordinary nitrogen or liquid nitrogen);

Ordinary oxygen: 99.5 %, pure oxygen 99.95 %.

 

5.5. Cooling water requirements

 

1. Deionized water or distilled water must be used. If it cannot be replaced by barreled pure water, mineral water cannot be used, otherwise the service life of the laser will be affected;
2. In winter frozen areas, the chiller must be placed in an environment above 0 ℃.

 

5.6. Laser installation requirements

 

1. When the laser is installed and hoisted, the tilt angle of the laser is less than 5°;
2. Requirements for the surrounding space of the laser: the space around the laser shall be at least 1.5 meters, and the space from the top to the roof can be 1 meter;
3. Working environment temperature and humidity: the working environment temperature is + 25 ℃ ± 2 ℃, and the temperature fluctuation is small; The ambient humidity is less than 75 %, and condensation will not occur.

Suggestion: If the customer’s environment is poor, the laser must be in a separate room with air conditioner;

4. Floor foundation requirements: floor load: the floor load is greater than 1500 kg, the floor must be flat and leveled, and the unevenness is less than 6 mm;
5. There shall be no equipment with excessive vibration around the laser, that is, the laser shall not be installed on the vibrating ground;
6. Power supply requirements: 380 ± 10 %, 50 Hz, three-phase, neutral to ground.

Voltage regulator output 380 ± 2 %, 50 Hz, three-phase, neutral to ground, 50 kVA.

 

6. Installation, training, after-sales

 

6.1. Quality and inspection acceptance

 

The acceptance shall be carried out in strict accordance with the international standards and the corporate standards of SHANG CO., LTD.

CCILASER standard has formulated detailed standards for working environment and working conditions, basic technical requirements, cooling requirements, laser radiation safety, electrical safety, test methods, inspection and acceptance, packaging and transportation in the production process.

SHANDONG CCI CO., LTD. has passed the ISO 9001 international quality management system certification and formed a quality assurance system for the design, production and service of large, medium and small power laser processing equipment.

 

6.2. Service

 

6.2.1. Training and installation

 

After the pre acceptance of the equipment by end user, we will provide professional training to 2-3 technical operation and maintenance at end user address.

 

Training contents include:

 

1. General knowledge of laser safety protection;
2. Basic principle of laser and structure of laser cutting machine;
3. Operation skills of special laser cutting;
4. Equipment operation and precautions;
5. Equipment daily maintenance;
6. Laser adjustment and spare parts replacement.

 

Skills training time is about 5 days.

 

     

 

6.2.2. Installation and debugging:

 

After the equipment is transported to Party A, Party B shall, with the assistance of Party A, be responsible for the installation, commissioning and delivery of the equipment at Party A’s site, bring necessary special tools and commissioning appliances, and train the operation and maintenance personnel of the Demander again.

 

6.2.3. After-sales service

 

CCILASER has a 2-year warranty on the products purchased by users, with lifelong maintenance.

During the warranty period, if the equipment fails and the parts are damaged (except for human factors and force majeure factors), our company is responsible for free repair, and the replacement parts needed are provided by our company free of charge (except for consumable parts).

After the warranty period, the cost of maintenance shall be charged according to the actual maintenance cost.

CCILASER pays several return visits to all users every year and provides technical support services at any time. Our company is responsible for providing relevant spare parts to users for a long time.

After sales service response time: 2-12 hours. After receiving the user’s repair call, the after- sales engineer has a clear reply or arrives at the equipment site within 24 hours.

 

6.3. Fiber Laser Cutting Machine manufacturing, inspection and acceptance standards

 

The company’s manufacturing, inspection and acceptance of products shall comply with the enterprise standards, which refer to the following national standards:

 

GB7247	Radiation Safety, Equipment Classification, Requirements and User Guide for Laser Products
GB2421	Basic Environmental Test Regulations for Electronic Products
GB/TB360	Laser power energy test instrument specification
GB/T13740	Laser radiation divergence angle test method
GB/T13741	Laser radiation beam diameter test method
GB/T15490	General Specification for Solid State Lasers
GB/T13862-92	Laser radiation power test method
GB2828-2829-87	Batch-by-batch periodic inspection by attributes sampling procedure and sampling table

 

6.4 Quality assurance and delivery measures

 

6.4.1. Quality assurance measures

 

Our company manages in strict accordance with the internationally accepted ISO 9001 quality system.

In order to effectively ensure product quality and prevent unqualified products from flowing into the next process, incoming inspection, process inspection and final inspection shall be carried out from the initial warehousing of raw materials to the delivery.

Through effective control of the production process, the purpose of effective control of product quality is achieved, and all outgoing products are qualified.

 

       

 

6.4.2. Measures to ensure delivery

 

CCI Group has passed the ISO 9001 quality system certification. Its production and operation are carried out in strict accordance with the ISO 9001 quality system.

The whole process from signing a contract to delivering it to customers is strictly controlled. All contracts must be reviewed.

Therefore, the system can ensure that suppliers deliver products on time, with quality and quantity guaranteed.

 

Packaging and transportation: Party B’s packaging shall conform to the transportation packaging standards of domestic railways or highways.

Packed in solid wooden cases, it is suitable for long-distance bus transportation or train transportation, moisture-proof, rust proof, shockproof and rough handling, and is suitable for overall hoisting.

 

       

 

7. Fiber Laser Cutting Parameters

 

Material	Thickness	1000 W	1500 W	2000 W	3000 W	4000 W	6000 W	8000 W	10000 W	12000 W	15000 W
CS (O2)	1	8.0-10.0	15-26	24-30	30-40	33-43	35-44	40-50	42-52	45-55	48-60
	2	4.0-6.5	4.5-6.5	4.7-6.5	4.8-7.5	15-25	20-28	26-33	28-35	28-40	30-42
	3	2.4-3.0	2.6-4.0	3.0-4.8	3.3-5.0	7.0-12	13-17	15-19	16-25	18-30	20-30
	4	2.0-2.4	2.5-3.0	2.8-3.5	3.0-4.2	3.0-4.0	3.0-4.5	3.0-4.5	3.5-5.5	3.5-5.5	3.5-5.5
	5	1.5-2.0	2.0-2.5	2.2-3.0	2.6-3.5	2.7-3.6	3.0-4.2	3.0-4.2	3.3-4.5	3.3-4.8	3.3-4.8
	6	1.4-1.6	1.6-2.2	1.8-2.6	2.3-3.2	2.5-3.4	2.5-3.5	2.6-3.7	3.0-4.2	3.0-4.2	3.0-4.2
	8	0.8-1.2	1.0-1.4	1.2-1.8	1.8-2.6	2.0-3.0	2.2-3.2	2.3-3.5	2.5-3.5	2.5-3.5	2.5-3.5
	10	0.6-1.0	0.8-1.1	1.1-1.3	1.2-2.0	1.5-2.4	1.8-2.5	2.0-2.7	2.2-2.7	2.2-2.7	2.2-2.7
	12	0.5-0.8	0.7-1.0	0.9-1.2	1.0-1.6	1.2-1.8	1.2-2.0	1.5-2.1	1.2-2.1	1.2-2.1	1.2-2.1
	14	–	0.5-0.7	0.7-0.8	0.9-1.4	0.9-1.2	1.2-1.8	1.2-1.9	1.7-1.9	1.7-1.9	1.7-1.9
	16	–	–	0.6-0.7	0.7-1.0	0.8-1.0	0.8-1.3	0.8-1.5	0.9-1.7	0.9-1.7	0.9-1.7
	18	–	–	0.4-0.6	0.6-0.8	0.6-0.9	0.6-0.9	0.65-0.9	0.65-0.9	0.65-0.9	0.65-0.9
	20	–	–	–	0.5-0.8	0.5-0.8	0.5-0.8	0.6-0.9	0.6-0.9	0.6-0.9	0.6-0.9
	22	–	–	–	–	0.4-0.8	0.4-0.8	0.5-0.8	0.5-0.8	0.5-0.8	0.5-0.8
	25	–	–	–	–	–	0.3-0.55	0.3-0.7	0.3-0.7	0.3-0.7	0.3-0.7
	30	–	–	–	–	–	0.3-0.55	0.3-0.7	0.3-0.7	0.3-0.7	0.3-0.7
SS (N2)	1	18-25	20-27	24-30	30-35	32-45	42-52	50-65	60-75	70-85	72-85
	2	5.0-7.5	8.0-12	9.0-15	13-21	16-28	20-33	30-40	40-55	50-66	52-70
	3	1.8-2.5	3.0-5.0	4.0-6.5	6.0-10.0	7.0-15	15-22	18-27	27-38	33-45	38-50
	4	1.2-1.3	1.5-2.4	3.0-4.5	4.0-6.0	5.0-8.0	10-15	12-16	18-25	22-32	25-35
	5	0.6-0.7	0.7-1.3	1.8-2.5	3.0-5.0	3.5-5.0	8.0-12	10-15	15-22	18-25	20-30
	6	–	0.7-1.0	1.2-2.0	2.0-4.0	2.5-4.5	4.8-8.0	6.0-10.0	12-15	15-21	18-25
	8	–	–	0.7-1.0	1.5-2.0	1.2-2.0	3.0-4.0	3.5-5.0	8.0-12.0	10-16	12-18
	10	–	–	–	0.6-0.8	0.8-1.2	1.6-2.5	2.0-2.7	6.0-8.0	8.0-12	10-15
	12	–	–	–	0.4-0.6	0.5-0.8	0.8-1.5	1.2-2.0	3.0-5.0	6.0-8.0	8.0-10
	14	–	–	–	–	0.4-0.6	0.6-0.8	1.2-1.8	1.8-3.0	3.0-5.0	3.5-6.0
	20	–	–	–	–	–	0.3-0.5	0.4-0.7	1.2-1.8	1.8-3.0	2.0-3.5
	25	–	–	–	–	–	0.2-0.4	0.3-0.5	0.6-0.7	1.2-1.8	1.5-2.0
	30	–	–	–	–	–	–	0.2-0.4	0.5-0.6	0.6-0.7	0.8-1.0
	40	–	–	–	–	–	–	–	0.4-0.5	0.5-0.6	0.6-0.8
	50	–	–	–	–	–	–	–	–	0.3-0.55	0.3-0.6
Al (N2)	1	6.0-10.0	10-20	15-25	25-38	35-45	42-55	48-65	60-75	70-85	70-85
	2	2.8-3.6	5.0-7.0	7.0-10.0	10-18	13-24	20-40	25-48	33-45	38-50	40-55
	3	0.7-1.5	2.0-4.0	4.0-6.0	6.5-8.0	7.0-13	15-25	20-33	25-35	30-40	35-45
	4	–	1.0-1.5	2.0-3.0	3.5-5.0	4.0-5.5	9.5-12	13-18	21-30	25-38	30-40
	5	–	0.7-1.0	1.2-1.8	2.5-3.5	3.0-4.5	5.0-8.0	9.0-12	13-20	15-25	20-30
	6	–	–	0.7-1.0	1.5-2.5	2.0-3.5	3.8-5.0	4.5-8.0	9.0-12	13-18	15-24
	8	–	–	0.6-0.8	0.7-1.0	0.9-1.6	2.0-2.5	4.0-5.5	4.5-8.0	9.0-12	11-15
	10	–	–	–	0.4-0.7	0.6-1.2	1.0-1.5	2.2-3.0	4.0-6.0	4.5-8.0	6.0-10.0
	12	–	–	–	0.3-0.45	0.4-0.6	0.8-1.0	1.5-1.8	2.2-3.0	4.0-6.0	5.0-8.0
	16	–	–	–	–	0.3-0.4	0.5-0.8	1.0-1.6	1.5-2.0	2.2-3.0	2.8-3.5
	20	–	–	–	–	–	0.5-0.7	0.7-1.0	1.0-1.6	1.5-2.0	2.0-2.5
	25	–	–	–	–	–	0.2-0.5	0.4-0.7	0.7-1.0	1.0-1.6	1.2-2.0
	30	–	–	–	–	–	–	0.3-0.6	0.5-0.7	0.7-1.0	1.0-1.8
	40	–	–	–	–	–	–	–	–	0.3-0.7	0.7-1.2
	50	–	–	–	–	–	–	–	–	–	0.3-0.7
Cu (N2)	1	6.0-10.0	8.0-13	10-16	20-30	25-35	35-45	40-55	65-75	75-85	75-85
	2	2.8-3.6	3.0-4.5	4.5-7.5	6.0-10.0	8.0-12	20-30	28-40	33-45	38-50	40-55
	3	0.5-1.0	1.5-2.5	2.5-4.0	4.0-6.0	5.0-8.0	12-18	20-30	25-40	30-50	32-50
	4	–	1.0-1.6	1.5-2.0	3.0-5.0	3.2-5.5	5.0-8.0	10-15	15-24	25-33	27-35
	5	–	0.5-0.7	0.9-1.2	1.5-2.0	2-3	4.5-6.0	6.0-9.0	9.0-15	15-24	18-26
	6	–	–	0.4-0.7	1.0-1.8	1.4-2.0	3.0-4.5	4.5-6.5	7.0-9.0	7.0-9.0	10-18
	8	–	–	–	0.5-0.7	0.7-1.2	1.6-2.2	2.4-4.0	4.5-6.5	4.5-6.5	8.0-10.0
	10	–	–	–	–	0.2-0.5	0.8-1.2	1.5-2.2	2.4-4.0	2.8-4.2	5.0-7.0
	12	–	–	–	–	–	0.3-0.5	0.8-1.2	1.5-2.2	1.0-1.8	2.8-4.2
	14	–	–	–	–	–	0.3-0.4	0.4-0.6	0.6-0.8	0.8-1.5	1.0-1.8
	16	–	–	–	–	–	–	0.3-0.5	0.4-0.6	0.6-0.8	0.8-1.5
	18	–	–	–	–	–	–	–	0.3-0.5	0.4-0.6	0.6-0.8
	20	–	–	–	–	–	–	–	–	0.3-0.5	0.4-0.6
	25	–	–	–	–	–	–	–	–	–	0.3-0.5

 

Note: The chart is for client reference. The actual condition is according to the metal sheet, air and etc.

8. Cutting consumables

 

Focusing lens/Collimation lens	Protective Windows
Ceramic Holder	Cutting Nozzle

 

9. Global Core Strategic Partners of CCI Laser